Samsung EDL Cable Make using data cable (Guide) FREE 2024
Ditch the Test Points: Make Your Own Samsung Qualcomm EDL Mode Cable (Without Soldering!)
Let's Get Started!
- Prepare the Cable:
- Locate the middle plastic sheath: This covers the wires running through the cable.
- Carefully cut a small section: Just enough to expose the colored wires inside (avoid cutting through the cable itself!).
- Identify the Wires:
- Black: This is your ground wire.
- Green: This is the boot signal wire.
- Other colors: Ignore these for now.
- Connect the Wires:
- Twist the exposed black and green wires together. You can wrap them with electrical tape for extra security.
- Boot into EDL Mode:
- Connect your modified cable to your phone and PC.
- Once in the device manager, you can see 9008 modes then connect with a new fresh cable with your mobile
- Unlock the FRP (Optional):
- Use your preferred FRP unlock tool like UMT. Follow the tool's instructions carefully.
- Video Guide: Click Here (Credit goes to unlock tool)
0 تعليقات
Do Not Send SPAM Link !!!!