🔓 Itel FRP Unlock Guide 2025 – Simple Fix for Google Account Lock
If you’ve ever dealt with an Itel phone stuck on the Google verification screen after a factory reset, you know the struggle. It’s frustrating—especially when the customer doesn't remember their Google account details.
Luckily, there's a simple fix that works for most Itel models. I’ve been using this method in my mobile repair shop, and it’s saved me countless hours.
Let me walk you through it—step by step.
🔍 First, Know Your Itel Phone (Model + CPU)
Before doing anything, you need to identify the phone’s model and processor. Why? Because Itel uses different chipsets (like SPD and sometimes MTK), and flashing the wrong file can brick the phone.
How to find the model and CPU:
-
Check the sticker under the battery (if removable).
-
If the phone powers on, go to Settings > About Phone.
-
Use software like CM2, Miracle Box, or SPD Tool to read the phone info.
-
Or simply search the model on Google with “Itel [model] CPU”.
Most Itel phones use Spreadtrum (SPD) chips, so we’ll focus on that here.
📁 Download Itel FRP Files (GSM RK Tested)
I’ve collected and tested FRP reset files for many Itel models. You can download the right one from our page (link below). These files are lightweight and flash instantly.
🔐 Password for all files: GSMRK
Some popular models covered:
-
Itel A14, A14 Max, A25, A25 Pro, A26, A33, A36, A48, A55
-
Itel P33, P36, P15, Vision 1, Vision 1 Plus
-
Itel S15, S16 Pro, Alpha Lite, and more
I personally used the A25 Pro FRP file on a locked unit last week—worked perfectly.
🛠 How to Flash the Itel FRP File (Step-by-Step)
Here’s how I usually do it in the shop. This process is safe and fast if you follow each step.
⚙️ What you need:
- SPD Drivers installed on your PC
- ResearchDownload or UpgradeDownload Tool
- Correct FRP file (.pac or .bin format)
- USB cable
- A Windows PC
🚀 Steps to Unlock FRP:
- Install SPD drivers
- If not already installed, do this first. (Restart PC after.)
- Launch ResearchDownload tool
- Load the
.pac
file from the folder.
- Put the phone in flash mode
- Power off the phone. Hold Volume Down, then plug in USB.
- Click Start in the tool
- Flashing takes 1–2 minutes. Wait until you see "Passed".
- Unplug and reboot the phone
- It should boot without asking for any Google account.
That’s it—phone is unlocked!
❗ What if the phone doesn’t flash?
-
Try Volume Up instead of Volume Down
-
Reinstall SPD drivers
-
Try a different USB port or cable
-
If still stuck, flash full firmware then try FRP file again
📦 Download Links
✅ Click here to download Itel FRP files (Tested by GSM RK) | MIRROR
🔑 Password: GSMRK & GSM RK [Try if first one is not working]
0 Comments
Do Not Send SPAM Link !!!!