Xiaomi Xaga ENG Preloader Flash Without AUTH

Xiaomi Xaga ENG Preloader Flash Without AUTH

Flashing Guide Using xaga_eng Preloader Flash XML Scatter.zip

If you’re working on unbricking or restoring the Xiaomi Xaga (Redmi Note 11T Pro/POCO X4 GT) device, especially after a hard brick or bootloop, flashing the ENG preloader can be a vital step — without requiring AUTH (authentication). This guide explains how to use the xaga_eng Preloader Flash XML Scatter.zip file to flash your device using SP Flash Tool or compatible software.

🔧 What You Need

Files:

• ✅ xaga_eng Preloader Flash XML Scatter.zip (contains preloader & scatter)
• ✅ SP Flash Tool or CM2/MRT/UnlockTool (AUTH Bypass tools)
• ✅ MTK VCOM USB Drivers
• ✅ A USB Cable & Windows PC

📦 Inside the ZIP File

After extracting xaga_eng Preloader Flash XML Scatter.zip, you’ll find:

• preloader_xaga_eng.bin
• MTXXXX_Android_scatter.xml (scatter file to load in SP Flash Tool)

Also read :Generator IMEI COD99 Tool Free Download

🧰 How to Flash Xiaomi Xaga ENG Preloader Without AUTH

Step-by-Step Guide:

1. Install MTK USB Drivers
   Make sure MTK VCOM drivers are installed to detect your device in preloader mode.

2. Extract ZIP File
   Extract the contents of xaga_eng Preloader Flash XML Scatter.zip to a known folder.

3. Launch SP Flash Tool
   

   Also read :VIVO Y71 QCN FIle [Network Unlock] Free Download
   Open SP Flash Tool as Administrator.

4. Load Scatter File
   Click on "Choose" in the scatter-loading section and select MTXXXX_Android_scatter.xml from the extracted folder.

5. Uncheck All & Select Only Preloader
   Uncheck all partitions, then tick only the “preloader”.

6. Connect the Device
   Power off your Xiaomi Xaga completely.
   

   Also read :Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool
   Hold Volume Up and connect the USB cable to PC.

7. Begin Flashing
   Click “Download” in SP Flash Tool. The flash process should begin.

   ⚠️ If your tool says AUTH required, use tools like SP Flash Tool with MTK Auth Bypass or MTK Client (Python) to bypass.

8. Wait for the OK Sign
   After flashing completes, you will see a green checkmark or “Download OK”.

🛠️ Post-Flashing Actions

• Disconnect the device and try powering it on.
• If the device doesn't boot fully, you may need to flash full firmware next.
• This method only replaces the preloader — not the entire ROM.

⚠️ Disclaimer

• This guide is for educational purposes only.
• Flashing the wrong preloader can brick your device.
• Proceed at your own risk. We are not responsible for any damage caused.

Also read :Xiaomi Pro Tool V7.0.8 Free Download

📥 Download xaga_eng Preloader Flash XML Scatter.zip

Filename: xaga_eng Preloader Flash XML Scatter.zip
Size: ~2 MB
Content: ENG Preloader & Scatter File
Use: Flashing via SP Flash Tool without AUTH

💾 Download Link