Motorola Edge 50 Pro – Full Dump File (Tested & Working)

Motorola Edge 50 Pro – Full Dump File (Tested & Working)

If you're struggling with a dead Motorola Edge 50 Pro, boot issues, or a device stuck in Qualcomm mode, this full dump can help recover it. I’m sharing the working Edge 50 Pro Full Dump that can be used for EDL repair, partition restore, or deep-level service work.

Download Link

Full Dump – Motorola Edge 50 Pro
🔗 Download here

What this dump can fix

This file is mainly used for hardware-level or software-corrupted devices:

• Dead / no power
• Stuck in Qualcomm HS-USB QDLoader 9008
• Corrupted GPT
• Partition damage
• Bootloop due to wrong flashing
• Blank screen after repair

This dump includes all major partitions required for deep recovery.

How to use it (simple steps)

You must have a tool that supports Qualcomm EDL flashing:

• QFIL / QPST
• Hydra
• UMT QcFire
• TFM
• Any professional EDL tool

Steps:

1. Put the device into 9008 mode (EDL).
2. Load the rawprogram and patch XML (if your tool supports it), or manually flash partitions.
3. Restore required partitions such as: gpt_main, boot, modem, abl, system/vendor (only if necessary).
4. Reboot once the process finishes.

⚠ Only flash what your device actually needs. Full flashing is risky if you’re not sure.

⚠ Important Notice

This dump is for technicians only.
You must know what you’re doing. Wrong flashing may cause:

• Permanent brick
• Calibration loss
• Network issues

Always back up your original partitions before writing anything.