MTK Mobile Phone Boot Logo Changer Free Download - 2021 Updated

Boot logo is that the very first thing that comes up while turning on your smartphone. it's usually an animation of your smartphone’s brand logo. it'd get a touch boring after a short time. But does one know that you simply can change the boot logo on rooted Android phones? How can we modify the Boot Logo on MediaTek Smartphones?

Yes, if you own a MediaTek powered smartphone and need to urge obviate the default boot logo, you're at the proper place. This guide will teach you ways to vary the boot logo on MediaTek Android smartphones.

Recently, we share a trick on Installing Custom Boot Logo on OnePlus 3/3T devices. Now, We are getting to show you ways to vary the boot logo on MediaTek powered phones using Smartphone Flash Tool. Obviously, this procedure needs root access. We also recommend you to read the subsequent warnings and notes before proceeding.


We aren't liable for any damage which may happen to your device during this process. Keep that in mind and roll in the hay at your own risk albeit you're following this guide. This guide is written carefully detailing all necessary steps and by following it you agree that you simply understand these risks. If you're clear with all that, allow us to begin and obtain into the procedure now.


  • Rooted Mediatek chipset smartphone
  • Smartphone Flash Tool, MTK drivers, and Logo builder tool for Windows
  • Your default logo’s logo.bin file
  • TWRP or Clockwork recovery (Optional)
  • A PC or laptop

How To Change Boot Logo?

  1. Steps to vary Boot Logo on MediaTek Smartphones
  2. Download and install all the programs we provided before on your Windows PC or laptop.
  3. You have to go to the manufacturer's website to get the brand .bin file. Download your stock firmware from the location and extract it to seek out the file logo.bin.
  4. Open Logo Builder tool that we downloaded, click New Project. Select the brand .bin file that we've found. this is often where you edit the brand as per your own tastes.

  5. Edit the brand image the maximum amount as you wish and click on the Make a button to pack the brand .bin file again.
  6. You will notice two files created within the destination folder: logo.bin and we will use either file to proceed. Each file is often utilized in how to urge the brand into your phone’s boot.

  7. Now open the Smartphone Flash Tool and flash the brand .bin file. this may do the trick. After a successful flash, your new boot logo will replace the older one in your smartphone.
  8. If you've got any custom recovery tools like TWRP recovery, use the Transfer it to the phone and flash it with any of the recovery tools.
  9. Restart the phone and you'll now notice the boot logo now changed.

  10. That is all from us now. Hope this helped you to vary the boot logo on MediaTek smartphones. If you enjoyed the tactic and therefore the outcome, share it together with your friends. Drop a comment below if you've got any queries or feedback.

File Information:

Filename:-  Logo Builder V1.6
File Size:-607 KB
File Type:- rar
File Password:-No Need


Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.

Credits: Logo Builder V1.6 is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.

Post a Comment