Free Tool Unbrick Oppo F Series via Fastboot Commands

How To unbrick Oppo F Series Via Fastboot Commands

In this post, I have a solution Oppo F Series that is stuck on the hang-on logo or continues restart like a problem. if you have any phone who started from the f series and you can face any problem then please I suggest you read this complete post. in this post, I am showing you how to unbrick the OPPO F series smartphone. let's started !!!

Just as these customizations tend to add more functionality to your device, they might prove to be risky as well. If you don’t perform the steps correctly or flash an incorrect mod, then your device might end up in a boot loop or get bricked. Fortunately, there’s still a handy way out. You could unbrick the Oppo F series devices via Fastboot Commands and bring them back to life. Let’s check out how this could be achieved.





Supported Models:


  • Unbrick Oppo F1
  • Unbrick Oppo F1 Plus
  • Unbrick Oppo F1s
  • Unbrick Oppo F5 Youth
  • Unbrick Oppo F5
  • Unbrick Oppo F3 Plus
  • Unbrick Oppo F3
  • Unbrick Oppo F5 Pro
  • Unbrick Oppo F7
  • Unbrick Oppo F7 128G
  • Unbrick Oppo F9
  • Unbrick Oppo F11
  • Unbrick Oppo F11 Pro
  • Unbrick Oppo F15
  • Unbrick Oppo F17 Pro
  • Unbrick Oppo F17
  • Unbrick Oppo F9 Pro
  • And many more...


How To Use?


STEP 1: Install Android SDK

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide to unbrick the Oppo F series via Fastboot Commands.


STEP 2: Boot Device to Fastboot Mode


Since your device is in a boot loop/soft-brick state, you cannot use the ADB reboot bootloader command. Hence you will have to opt for the hardware key combinations. Here’s how it could be done:

  1. To begin with, power off your device (if you can’t do so via the Power key then let the battery drain out).
  2. Once it turns off, press and holds the Power and Volume Down keys for a few seconds,
  3. Your device will be booted to Fastboot Mode. Now connect it to the PC via USB cable.

STEP 3: Download Stock Firmware

Next up, you will have to download the stock firmware for your device. You may grab it from Oppo’s official Software Update page. At the time of writing, the stock firmware for some Oppo F series devices isn’t available on that page. So users having those devices would have to download the firmware from any other trustworthy site and then proceed with the below steps to unbrick the Oppo F series via Fastboot Commands.


STEP 4: Extract Oppo OZIP Firmware


The firmware that you have downloaded will be in OZIP format. You will have to convert it to ZIP

STEP 5: Download URTool


Download the URTool from GitHub [Credits: XDA Recognized Contributor acervenky] and extract it to any convenient location on your PC. This tool will be used to extract the data.br files (the system.new.dat.br and vendor.new.dat.br files).



STEP 6: Set up the Working Environment

  1. Once you have extracted the OZIP firmware, you will get the resultant ZIP firmware file.
  2. Extract it using any software of your choice (WinRAR, 7ZIP, etc).
  3. Upon extraction, you shall see the boot.img file. Copy it and transfer it to the platform-tools folder on your PC.
  4. Next up, again go back to the extracted firmware and this time head over to the firmware-update folder.
  5. Copy all the files of that folder and transfer them to the platform-tools folder as well.  The setup is now complete and you may proceed to the next steps to unbrick the Oppo F series via Fastboot Commands.

STEP 7: Extract Oppo dat.br Files

  1. You will now have to extract the system.new.dat.br and vendor.new.dat.br files.
  2. Copy-paste the firmware ZIP file that you had got after converting OZIP to ZIP. Then transfer this firmware ZIP file to the URTool folder.
  3. After that, double click on the URTool.bat to launch the tool.
  4. The Tool will now read the file and display the same in the window. Type in the corresponding file number in the window and hit Enter (if there’s only one ZIP file, then it would be 1).
  5. After that, double click on the URTool.bat to launch the tool.
  6. The Tool will now read the file and display the same in the window. Type in the corresponding file number in the window and hit Enter (if there’s only one ZIP file, then it would be 1).
  7. Extraction will now begin and could take a few minutes.
  8. Once the extraction is done, the files will be placed under the URTool-master > 01-Project> 1-Sources folder.
  9. Copy the system.img and vendor.img files from there and transfer them to the platform-tools folder.

    STEP 8: Unbrick Oppo F series via Fastboot Commands


    1. Before moving ahead, verify that you have the following files in the platform-tools folder: boot.img, system.img, vendor.img, and all the 
    2. files from the firmware-update folder.
    3. If that is all well and good, then head over to the platform-tools 
    4. folder, type in CMD in the address bar, and hit Enter. This shall launch the Command Prompt window.
  1. Now type in each of the below commands, one at a time, in this CMD window to flash the Oppo stock firmware (if you get an error while executing a command, skip that command and move over to the next one. Never leave the command screen in between):
    fastboot flash abl abl.img
    fastboot flash aop aop.img
    fastboot flash bluetooth BTFM.img
    fastboot flash boot boot.img
    fastboot flash cmnlib cmnlib.img
    fastboot flash cmnlib64 cmnlib64.img
    fastboot flash devcfg devcfg.img 
    fastboot flash dsp dspso.img
    fastboot flash dtbo dtbo.img
    fastboot flash hyp hyp.img
    fastboot flash imagefv imagefv.img
    fastboot flash keymaster keymaster64.img
    fastboot flash modem modem.img
    fastboot flash qupfw qupv3fw.img
    fastboot flash system system.img
    fastboot flash splash splash.img
    fastboot flash storsec storsec.img
    fastboot flash tz tz.img
    fastboot flash uefisecapp uefisecapp.img
    fastboot flash vbmeta vbmeta.img
    fastboot flash vbmeta_system vbmeta_system.img 
    fastboot flash vbmeta_vendor vbmeta_vendor.img 
    fastboot flash vendor vendor.img 
    fastboot flash xbl xbl.img
    fastboot flash xbl_config xbl_config.img
    fastboot reboot
  2. The last command will boot your device back to the OS and your task stands complete.

So this is all from this guide on how you could unbrick any Oppo F series device via Fastboot Commands. No doubt the process is somewhat lengthy and could also be tagged as complicated by some, but as of now, that is the only way out. With that said, if you have any queries concerning the aforementioned steps, do let us know in the comments section below. We will get back to you with a solution at the earliest.

Post a Comment

0 Comments