EasyJTAG Plus Tester Edition – Version 2.1.0.1 Free Download

EasyJTAG Plus Tester Edition – Version 2.1.0.1 Free Download

The EasyJTAG Plus Tester Edition is one of the most used tools in mobile repair shops. Many technicians, small service centers, and chip-level repair experts depend on this box to fix dead phones, repair UFS, write firmware, and unlock many kinds of problems. The new update, Version 2.1.0.1 (released on 10 December 2025), brings many changes that make the tool even better.

In this long review, I will explain everything in very simple English so everyone can understand it easily. This article is written specially for users who visit websites but have trouble reading complex technical English. So do not worry — I will explain all features in a friendly and clear way.

This full guide includes:

• What new features were added
• Why these features are useful
• How this update helps mobile technicians
• Simple examples
• My personal thoughts
• And a full detailed explanation of each section

Let’s start.

1. Introduction: Why this update matters

Mobile phones are getting more advanced every year. New chips come, new firmware formats arrive, and brands start using more security. For repair technicians, this creates many problems. Tools like EasyJTAG must always update to support new phones.

This update (2.1.0.1) focuses on:

• More device support
• Better UFS (storage chip) functions
• Easier Qualcomm repair
• Better firmware unpacking
• Support for encrypted files
• Fewer bugs
• Better stability

All of these changes help a technician save time, avoid errors, and repair phones faster.

2. Support for more vendors (Google Pixel & Xiaomi XRING)

This is one of the biggest improvements of this update.
EasyJTAG can now work with:

• Google Pixel phones

Google Pixel devices are becoming popular worldwide. They have tight security, which makes them very difficult to repair. Flashing or writing firmware on Pixel phones earlier required special tools. With this update, EasyJTAG now supports vendor flashing for these devices.

This means:

• You can flash Pixel firmware
• You can repair partition issues
• You can fix phones stuck on logo
• You can restore corrupted system files

For Pixel repair technicians, this single feature itself is very valuable.

• Xiaomi XRING devices

Xiaomi XRING is a new device line with stronger security. Many tools cannot handle these devices properly, but now EasyJTAG adds support to flash them.

This helps when:

• The phone doesn’t turn on
• Firmware update failed
• Storage chip became corrupted
• You need to rewrite system files

So, in simple words:
This update helps repair new models that were not easy to fix before.

3. Advanced UFS Features (Very Important for Dead Phones)

Today almost all smartphones use UFS storage. When UFS gets corrupted, the phone becomes completely dead. No power, no charging, no display. Only chip-level tools like EasyJTAG can fix such phones.

This update adds many new UFS functions:

✔ Write UFSConfig file

UFSConfig contains important information about memory. When it gets damaged, the phone can die. Now technicians can write this file safely.

✔ Provision UFS from firmware files

This is a very strong feature.
It means you can rebuild UFS by using firmware formats like:

• PIT
• Scatter
• Qualcomm firmware
• Unisoc
• Google Pixel firmware
• XRING firmware

So even if the phone is totally dead, you can revive it using these files.

✔ Read Project ID (Oppo / Realme / OnePlus)

Project ID tells you the exact model and variant of the phone.
This is useful because:

• Oppo and Realme have many variants
• Using the wrong firmware can make the phone more damaged
• Knowing the exact ID helps choose correct firmware

These UFS improvements make chip-level repair much easier.

4. eSIM Support for LX9 Boxes

More new phones are using eSIM instead of physical SIM cards. So repair tools must support eSIM-related work.

This update adds:

• Support for LX9 boxes made after September 2025
• New firmware v14 for LX9

This helps when:

• A phone’s eSIM profile is corrupted
• The device cannot read eSIM
• You need to repair or reset eSIM functions

Earlier, many tools failed with eSIM phones, but now EasyJTAG becomes more useful.

5. Qualcomm USB (9008 Mode) Improvements

9008 mode is a special mode used to repair dead Qualcomm phones.
This update adds several helpful features:

✔ Authorization bypass (Oppo, Realme, OnePlus)

These brands often require server login or special authorization.
Now EasyJTAG can bypass that for some models.

Meaning:

• You can flash without server
• You can repair without login
• It saves money and time

✔ Read Project ID via 9008

This helps identify the device even when it is dead.

✔ Many new Firehose loaders

Firehose files are required to work with Qualcomm storage.
More firehorses = more phone models supported.

This update makes Qualcomm repair much easier and safer.

6. Support for Encrypted Lenovo Firmware (MTK + Qualcomm)

Lenovo firmware is often encrypted.
Earlier many tools could not open or use these files.

But now EasyJTAG supports:

• Encrypted Qualcomm Lenovo firmware
• Encrypted MTK Lenovo firmware

This is helpful for technicians who get Lenovo tablets and phones with issues like:

• Stuck on logo
• Dead boot
• Corrupted firmware
• FRP-related repair

This update removes one more headache from daily repair work.

7. Samsung Battery Cycle Read & Reset

Many customers ask:

• “How used is this phone?”
• “Is the battery original or replaced?”
• “Why is the battery draining fast?”

Samsung phones store battery cycle count in the system.

This update gives two simple tools:

✔ Show battery cycle count

You can see how many times the battery has been charged.

✔ Reset battery cycle

Useful for:

• Refurbished phones
• After installing a new battery
• When original cycles display incorrectly

This is a small feature but very useful for daily repair shop work.

8. Better Firmware Unpacking Tools

Firmware unpackers allow you to open firmware files and extract parts like boot, system, userdata, etc.
This update improves unpackers for:

✔ MTK Preloader

The parser is now more stable and accurate.

✔ Nothing Phone unpacker

Better support for Nothing OS updates.

✔ Google Pixel unpacker

Firmware extraction is smoother and fails less.

✔ Asus RAW firmware unpacker

Asus firmware is often complex. This update fixes unpack issues.

These improvements help technicians who need to analyze firmware, extract partitions, or create custom repair files.

9. Bug Fixes & Overall Improvements

Like every update, this one also fixes many old issues.
These fixes may not be visible, but they help in:

• Fewer crashes
• More stable flashing
• Smooth UFS operations
• Better device detection
• Faster processing

“Many more features added (need to explore)” means the developers added changes that will show up in different situations during real repair work.

10. How this update helps a normal technician

Here’s how this update makes your work easier:

✔ You can repair more new phones

Pixel, XRING, new Oppo, Realme, Lenovo, Nothing, etc.

✔ Dead phone recovery becomes easier

Better UFS support + more Qualcomm features.

✔ More situations can be handled

eSIM, encrypted firmware, battery cycles, etc.

✔ Saves time

Less errors, better unpackers, and more automation.

✔ Saves money

Authorization bypass removes the need for paid servers in some cases.

✔ Reduces risk

Better support = less chance of bricking the phone.

For a shop owner, this update means more work completed in less time.

11. Simple examples (so new users understand easily)

Example 1: Dead Oppo phone

Phone stuck in black screen.
EasyJTAG shows Project ID.
You flash correct firmware.
Phone comes back to life.

Example 2: Pixel phone stuck on logo

Earlier you could not flash it.
Now you can repair using vendor flashing.

Example 3: Lenovo tablet with encrypted firmware

Before: cannot flash
Now: EasyJTAG opens and writes the firmware.

Example 4: Customer asks battery health

You read Samsung battery cycles and explain clearly.

Example 5: XRING phone stuck after update

Now supported — you can fix it.

These simple examples show how much easier repair becomes.

12. My final review of this update

After checking everything, I can say this update is very useful.
It focuses on real problems technicians face every day.

What I liked the most:

• Pixel flashing
• Strong UFS functions
• Oppo/Realme bypass
• Lenovo encrypted support
• Better unpacking tools

What could still improve:

• More Xiaomi models support
• Faster loading times
• More auto-detect options

But overall, the update is worth installing.

If you use EasyJTAG regularly, this update will make your work smoother, safer, and faster.

Download Link

https://drive.proton.me/urls/4XVZ8TDCRG#Mw1tMl9RsWo1