How to Flash UnlockTool Full Dump with Pandora (2026)

How to Flash UnlockTool Full Dump with Pandora

If your phone is dead, stuck on logo, or not booting, flashing a full dump can fix it.
Many technicians use Pandora Tool to flash UnlockTool full dump files easily.

What Is Full Dump Flashing?

Full dump means full memory files of a phone.
It includes:

• Boot files
• System files
• User area
• Security data

Flashing full dump helps when:

• Phone is dead
• Software is damaged
• Phone is stuck on logo
• Normal flashing fails

What You Need

Before starting, make sure you have:

• Pandora Tool (latest version)
• Correct model full dump (UnlockTool dump)
• USB cable
• Phone battery charged
• MTK drivers installed
• PC or laptop

Step-by-Step Method

Step 1: Select Your Phone Model

Open Pandora Tool
Select your correct model number

This step is very important.
Wrong model = phone dead.

Step 2: Enable Advanced Write

Go to Flash Tab

✔ Tick Advanced Write

This option allows full dump flashing.

Step 3: Flash BOOT1 File

Now:

1. Select BOOT1 file
2. Click Write / Flash
3. Wait until it completes

Do not disconnect phone.

Step 4: Flash BOOT2 File

After BOOT1:

1. Select BOOT2 file
2. Click Write
3. Wait for success

This step is important for proper boot.

Step 5: Flash USER AREA

Now select:

✔ USER AREA file

Click Write / Flash

Wait till 100% complete.

After Flashing

• Disconnect phone
• Press power button
• Phone will boot normally
• First boot may take some time

If phone starts normally, flashing is successful ✅

Important Notes

• Always use correct model dump
• Do not skip any step
• Use good USB cable
• Do not interrupt flashing
• Backup if possible

Real-Life Result

Many users fixed:

• Dead boot issue
• Hang logo problem
• Software corruption

Using this exact method with Pandora Tool.

Advantages

• Easy method
• Works on MTK phones
• No need full firmware
• Saves time
• Tested and working

FAQs

Q1. Can I flash without boot files?

No. Boot1 and Boot2 are required.

Q2. Is this safe?

Yes, if you use correct dump and model.

Q3. Can I use this on other brands?

Only on supported MTK models.

Q4. Phone not detected?

Check drivers and use BROM mode.

Q5. Is this method tested?

Yes. Tested and working successfully.