Samsung Android 16 FRP Bypass Tool (2025 Edition) Free Download

Samsung Android 16 FRP Bypass Tool (2025 Edition) – by GSMYOGESH.COM

If your Samsung phone is stuck at the Google verification screen after a factory reset, especially on Android 16, this new Samsung FRP Bypass Tool made by GSMYOGESH can help you unlock it in a simple way.
The tool uses a working modem exploit to trigger the USB Debugging popup, and once ADB is enabled, the FRP lock can be removed with one click.

This guide explains how the tool works, what you need, and how to use it safely.

Important Note (Please Read)

This tool is not tested on all Samsung models.
I tested it on only one device, and the method worked on that particular unit. Since this is a test version, results may vary depending on the model and software version.

If something does not work or you get an unexpected error, please do not blame me.
This tool is released for testing, and users are trying it on different devices at their own risk.

Key Features of This FRP Tool

1. Auto Modem Detection

You don’t have to search for COM ports manually.
As soon as you connect your Samsung phone, the tool automatically picks the Samsung Mobile USB Modem port.

2. Advanced Info Reading

The tool reads device details using:

• AT+DEVCONINFO
• Standard AT commands

This helps detect Model, IMEI, and Software Version accurately, even on newer security patches.

3. Android 16 Support

The exploit used in this tool is updated for 2025 Android security patches.
It can successfully trigger the USB Debugging popup on Android 16.

4. One-Click FRP Remove

Once ADB is enabled, the tool can remove FRP and bypass the Setup Wizard with a single button.

5. Clean Log System

Success messages show in green, errors in red, and action buttons are clearly highlighted.
This makes the process easier to follow.

What You Need Before Starting

1. Samsung USB Drivers installed
2. A working USB cable
3. Wi-Fi connected on the locked phone
4. ADB files (adb.exe + DLLs) in the same folder as the tool

How to Use the Tool (Step-by-Step)

Step 1: Connect Your Phone and Read Info

1. Open SamsungFRP_GSMYOGESH.exe as Administrator.
2. Connect your Samsung device with a USB cable.
3. Click Refresh. The tool should automatically detect the modem port.
4. Click READ INFO.
   • If the log shows your Model + IMEI correctly, you are good to go.
   • If it shows Unknown, unplug and reconnect the cable and try again.

Step 2: Enable ADB (Exploit Method)

1. Click STEP 1: ENABLE ADB (2025).
2. The tool sends the payload to your device.
3. Look at your phone screen.
4. A popup will appear: “Allow USB Debugging?”
5. Tick Always allow from this computer
6. Press Allow

Once this is done, ADB mode becomes active.

Step 3: Remove FRP Permanently

1. After you allow USB Debugging, return to the tool.
2. Click STEP 2: REMOVE FRP (ADB).
3. The tool will send the FRP bypass command.
4. The phone will reboot or take you directly to the home screen.

That’s it.
FRP is removed, and the phone is back to normal.

Troubleshooting Tips

1. “Ver: Empty” or “Unknown” in logs

• Try using a better USB cable
• Close other Samsung software like Odin/Kies
• Click Read Info again

2. USB Debugging Popup Didn’t Appear

• Unplug and reconnect the cable
• Restart the phone and try Step 1 again
• You can also try *#0*# test mode, but the tool works best with modem mode

3. “ADB Device Not Found”

This means you didn’t tap Allow fast enough.
Just reconnect the phone and click Step 2 again.

Download Link

MediaFire  - https://www.mediafire.com/file/aawm77qicgu6kb8/Samsung_Android_16_GSMYOGESH.rar/file

Google Drive - https://drive.google.com/file/d/1fO1r-GvAFFJDiUuTdGDobWNabFW64U-H/view?usp=sharing

Password:- softwarecrackguru

But remember:

• This is a test version
• It is not tested on all Samsung models
• You might face errors depending on software/security version

Use it carefully and only for legitimate repair purposes.