Samsung Flasher v1.1 By Gautam Kumar Free Download

I want to share a small but useful tool for Samsung phones. It is called Samsung Flasher v1.1. This tool is made for people who do not want to deal with complicated flashing steps. Everything is kept simple and straight.

Most Samsung flashing tools ask you to load files manually, select options, and double-check settings. For many users, this becomes confusing. Samsung Flasher works differently. You just connect the phone, keep the firmware files in the same folder as the tool, and run it. The tool does the rest on its own.

When you connect a Samsung phone in Download Mode, the tool detects it automatically. There is no need to choose the model or click extra buttons. As soon as it starts, it looks inside its folder and finds all the firmware files with .tar or .md5 format. Whatever files are there, it flashes them.

If the firmware package also has a PIT file, the tool flashes that too. You do not need to enable any special option. This is helpful in cases where partition repair is needed, but you do not want to risk manual mistakes.

The idea behind this tool is very simple. Keep the firmware and the tool in one place, run the file, and wait. This makes flashing much faster, especially when you already know which firmware you want to use.

One thing you may notice is that some antivirus software shows a warning when you run the tool. This happens because the file is packed with UPX to reduce its size. This kind of warning is common with compressed tools. It does not mean the tool is dangerous. It is a false alert caused by compression, not by malware.

This tool is useful for people who flash Samsung phones often and want a quick method. It is also good for beginners who are scared of complex flashing tools. There are no confusing options, no extra settings, and no heavy interface.

Samsung Flasher v1.1 – Main Features

One-click Samsung firmware flashing
Auto-detects phone in Download Mode
Flashes all .tar and .md5 files automatically
Auto-flashes PIT file if present
No manual file selection needed
Works with firmware kept in the same folder
Fast and lightweight tool
Simple and clean interface
Improved stability in v1.1
Suitable for beginners and technicians

How to Flash Samsung Phone Using Samsung Flasher v1.1

Follow these steps slowly. Do not rush.

Step 1

Turn off your Samsung phone completely.

Step 2

Put the phone into Download Mode.
Press and hold Volume Down + Power buttons together.
(On some models, connect USB cable while holding buttons.)

Step 3

Connect the phone to your computer using a USB cable.

Step 4

Open the Samsung Flasher v1.1 folder on your computer.

Step 5

Copy only the firmware files you want to flash into this folder.
These files should be .tar or .md5 format.

Step 6

Now double-click and run the Samsung Flasher tool.

Step 7

The tool will detect the phone automatically.
Flashing will start by itself.
No need to click anything.

Step 8

Wait until the flashing process finishes.
Do not disconnect the phone.

Step 9

Once flashing is done, the phone will reboot.
Now you can unplug the USB cable.

Important Tips

Do not remove the cable during flashing
Use correct firmware for your model
Antivirus warning is normal (false alert)
Be patient, flashing takes time

Translate

Samsung Flasher v1.1 By Gautam Kumar Free Download

Samsung Flasher v1.1 By Gautam Kumar Free Download

Samsung Flasher v1.1 – Main Features