Download Volcano Box V2.2.9 (2016 Edition) Crack [FREE]

Volcano Box Crack Setup Free Download Working 100%

VolcanoBox: The First and Exclusive Tool for Reading Backup Flash Files

The process of flashing a smartphone can be a daunting task, especially for those who are not tech-savvy. However, with the emergence of advanced tools like the VolcanoBox, flashing smartphones has become a simple process that can be performed by anyone with minimal technical knowledge. VolcanoBox is a powerful tool that enables users to read backup flash files for both MTK and SPD Android devices. It is the first and exclusive tool that provides this service, making it a valuable asset for technicians and smartphone enthusiasts alike.

How To Download Volcano Box V2.2.9 (2016 Edition) Crack Download Free Download

MTK Android Full Flash Backup

To read an MTK Android full flash backup, users must follow the steps provided below:

Root the phone and enable USB Debugging. The phone must be in working condition, and a memory card with a capacity of at least 2GB must be inserted and formatted to 32-bit.

Connect the phone to a computer using a USB cable.

Download and extract the VolcanoBox 2.2.9 software and open it.

Select the MTK tab.

Choose One-Key Root.

Select Backup Flash.

Choose a folder to save the flash file backup in the factory format.

Wait for the software to complete the process.

Search and download the latest Smart Phone Flash Tool (MTK Original Flash Tool).

Select the scatter file and click on download to initiate the flashing process.

SPD Android Full Flash Backup

Reading an SPD Android full flash backup is a slightly different process, but users can follow the steps outlined below:

Root the phone and enable USB Debugging. The phone must be in working condition, and a memory card with a capacity of at least 2GB must be inserted and formatted to 32-bit.

Download and install the VolcanoBox 2.2.9 software and run it.

Connect the phone to a computer while powered on.

Go to the SPD tab and select 6820/8810 from the boot selection.

Choose One-Key Root and select Backup Flash.

Untick Auto-Detect Pinouts.

Click on Run to detect the phone on ADB.

The software will ask users to specify a path to save the flash file.

Wait for the software to complete the process.

Open the folder where the flash file was saved and search for the latest version of ResearchDownload from Google (SPD Factory Flashing Tool).

Open ResearchDownload and click on Settings (2nd button from left).

Tick all boxes in the Check Boxes section.

Right-click on the FileName area in front of every box and browse to the folder where the VolcanoBox read the flash file.

Give the files the same name.

Click on Packet from ResearchDownload and choose Yes when prompted to perform the operation.

After writing the product version, specify a saving path and click on OK.

How to Make Any SPD Android Unsupported Phone Supported

Users who wish to make their SPD Android unsupported phone supported can follow these steps:

Root the phone and enable USB Debugging. The phone must be in working condition, and a memory card with a capacity of at least 2GB must be inserted and formatted to 32-bit.

Download and install the VolcanoBox 2.2.9 software and run it.

Connect the phone to a computer while powered on.

Go to the SPD tab and select 6820/8810 from the boot selection.

Choose One-Key Root and select Backup Flash.

Untick Auto-Detect Pinouts.

Click on Run to detect the phone on ADB

Features:

It will completely flash your device without any box as above mentioned clearly.
Do firmware updating.
Custom installation of new applications.
This is supported by various models.
Repair IMEI and make a new serial number if the SN and broken or removed.
Read and write flash via a newly added method.
100 % working windows computer or laptop device.
The unwanted app will be formatted after installing this on your demand.
Add new ID support like MTK6595, MTK6752, MTK6571, MTK6572.
Run boot loader for Volcano box.
Even more!!!