Download Realme X2 Pro Unbrick Tool No Need Auth -2023

Using the Realme X2 Pro Unbrick Tool, you can repair both soft and hard bricks and other software-related problems with your smartphone. It supports the Realme X2 Pro RMX1931 China model and allows for flashing via EDL Mode without the need for authentication.

Understanding Bricking

A brick or boot loop is a scenario where a smartphone gets stuck or freezes during the boot process due to software or firmware issues. This can happen due to a variety of reasons, such as:

  • Installing an incompatible ROM or update
  • Rooting or bootloader unlocking
  • Physical damage

Soft Brick

In a soft brick, the device may display the manufacturer's logo or animation for an extended period of time, but it will eventually boot up. This type of brick can usually be fixed by flashing a stock ROM or updating the firmware.

Hard Brick

A hard brick is a more severe situation where the device becomes completely unresponsive. It will not display any signs of booting, and it will not enter fastboot or recovery modes. Instead, when connected to a computer, it will typically show up as a "9008 USB COM driver/device."

Download Link

  • Realme X2 Pro Unbrick Tool (MSM Patch Tool) || Download (4.19 GB)

Features of the Realme X2 Pro Unbrick Tool

  • Unbricking: Rescues your device from soft or hard-bricked scenarios.
  • Repair: Fixes software-related issues that may have caused the bricking.
  • EDL Flash: Allows you to flash your device via EDL (Emergency Download) mode.

How to Use the Realme X2 Pro Unbrick Tool

  1. Install the Qualcomm 9008 USB driver on your computer.
  2. Launch the Realme X2 Pro Unbrick Tool.
  3. Leave the interface settings as they are.
  4. Click the 'START' button to initiate the unbricking process.
  5. Power off your Realme X2 Pro and then enter EDL Mode by one time pressing and holding the volume up and down buttons.
  6. No tool is started to flash. It will unbrick your device. Once the process is complete, you will receive a success notification.
  7. Safely disconnect your device from the computer and power it on. Your Realme X2 Pro should now be back in working order.

Post a Comment