Samsung M51(515F- U5) Downgrade File For FRP Remove by *#0*#

Samsung FRP M51 Normal Mode One Click Free 2024

FRP or Factory Reset Protection is a security feature that prevents unauthorized access to your Samsung device after a factory reset. If you forget your Google account credentials, you will not be able to bypass the FRP lock and use your device. However, some methods can help you remove the FRP lock without using your Google account. One of them is using a downgrade file that can lower the Android version of your device and disable the FRP lock.

In this article, we will show you how to use the Samsung M51(515F- U5) downgrade file for FRP removed by #0#. This method works for Samsung Galaxy M51 devices with Android 10 and One UI 2.1 versions. You will need a PC, a USB cable, and a tool called Samsung FRP 2023 to perform this method. Please follow the steps carefully and at your own risk.

How To Use?

Step 1: Download the Samsung M51(515F- U5) downgrade file from the link. The password to extract the file is unlocktool.net. You will get a file named M515FXXU2ATJ8_M515FODM2ATJ8_INS.zip.

Step 2: Extract the zip file and you will get four files: AP, BL, CP, and CSC. These are the firmware files that you will flash on your device.

Step 3: Download and install the Samsung USB driver on your PC from this link. This will allow your PC to recognize your device.

Step 4: Download and install the Samsung FRP 2023 tool on your PC from this link. This is a free tool that can bypass the FRP lock on Samsung devices.

Step 5: Turn off your device and boot it into download mode. To do this, press and hold the Volume Down and Power buttons together for a few seconds. When you see a warning screen, press the Volume Up button to confirm.

Step 6: Connect your device to your PC using a USB cable. The Samsung FRP 2023 tool should detect your device and show its model number and COM port.

Step 7: Click on the AP button and select the AP file from the extracted firmware folder. Do the same for the BL, CP, and CSC buttons and select the corresponding files.

Step 8: Make sure that the Auto Reboot and F. Reset Time options are checked and the Re-Partition option is unchecked.

Step 9: Click on the Start button and wait for the flashing process to complete. It may take a few minutes and your device will reboot automatically.

Step 10: After the reboot, you will see the setup screen. Do not connect to any Wi-Fi network or insert any SIM card. Just skip all the steps until you reach the home screen.

Step 11: Open the emergency dialer and dial *#0#. This will open a hidden menu with various options.

Step 12: Click on the [COM] REMOVE FRP [2023] Method 4 option and wait for a few seconds. This will remove the FRP lock from your device.

Step 13: Restart your device and you will be able to use it without any Google account verification. You can now set up your device as you wish.

Congratulations, you have successfully used the Samsung M51(515F- U5) downgrade file for FRP removed by *#0#. You can now enjoy your device without any FRP lock. However, this method may have some drawbacks, such as losing your data, warranty, and security updates. Therefore, we recommend you back up your data before performing this method and restore your device to the latest firmware after removing the FRP lock. You can also try other methods to bypass the FRP lock, such as using EFT, CM2, or UMT tools. We hope this article was helpful to you. If you have any questions or suggestions, please leave a comment below.

Download Links:

Download Samsung M51 Firmware File: Download

Tool Link: Download

Password: unlocktool.net

README:

Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32-bit and 64-bit).

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. Flashing any Firmware or recovery may brick the device.

Credits: Samsung M51 FRP File is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.